Karcher K 395 M User Manual

2021. 3. 19. 17:44카테고리 없음



Garden product manuals and free pdf instructions. Find the user manual you need for your lawn and garden product and more at ManualsOnline.

High Pressure Washer
Overview .....................2
Assembly Instructions ..........4
Using the Accessories ..........6
Shutting Down & Clean-Up ......8
Winterizing and Long-Term
Storage ......................8
Instructions ...................9
Optional Cleaning Accessories ..10
Specifications
Water volume ...........1.7 GPM
Voltage ................... 120 V
In USA call:
or visit our website:
Part No. 1.141-966.0
CategoriesKärcher Pressure Washer Manuals, Pressure Washer Manuals
TagsKärcher K 395 M
Download File
LanguageEnglish
Product BrandKärcher. Kärcher US Home and garden support phone: 1-800-537-4129
Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer
Document File TypePDF
Publisherkarcherresidential.com
Wikipedia's PageKärcher
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

K 3.97 M

High Pressure

Washer Operator

Manual

Overview ....................

2

Precautions ...............

3 - 4

Assembly Instructions .........

4

Operating Instructions .........

5

Using the accessories .........

6

Working with Detergents .......

7

Shut Down and Clean-Up

...... 8

Taking a Break ...............

8

Winterizing and Long-Term

Storage .....................

8

Maintenance Instructions

...... 9

Cleaning Tips ............

9 - 10

Optional Cleaning Accessories . 10

Troubleshooting ...........

11-12

Specifications

Working Pressure .....

9000 kPa

Max. Pressure .........

1600 PSI

Max. Water volume .....

1.5 GPM

Voltage ..................

120 V

Amp draw ............

13 AMPS

Please keep the original box, packaging and receipt.

Before operating this unit, please read this manual thoroughly and retain it for future reference.

Part No. 1.423-104.0

Manual Part No. 5.960-793.0 01/03EN

For household use only!

2

Item Description

1.Power cord

2.Trigger gun

3.Trigger gun safety lock

4.High pressure hose

5.Water inlet

6.Transport handle

7.Accessory compartment

8.Detergent tank

9.High pressure outlet 10. On/Off switch

11. Detergent tank cap

12. Wash brush

13. Quattro nozzle

NEVER!

Never point nozzle at people or animals.

Never drink alcohol or use drugs while operating this equipment.

Never operate while standing in water.

Never touch plug with wet hands.

Never let electrical connections rest in water.

Never operate pressure washer without the water turned on

Never use hot water

THE BEST ANTI-FREEZE PROTECTION IS PROVIDED BY USING AND STORING THE MACHINE IN SHELTERED SPACE

Safety Warnings

When using this product basic precautions should always be followed:

Read all the instructions before using the product.

High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself.

To reduce the risk of injury, do not operate the machine near children.

Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with the controls.

Stay alert — watch what you are doing.

Wear safety goggles.

Do not use acids, solvents, or any other flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.

Do not operate the product when fatigued or under the influence of alcohol or drugs.

Do not stand on unstable surfaces. Stand with both feet balanced at all times.

To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands.

The Trigger Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position.

WARNING

DO NOT USE WITH FLAMMABLE LIQUIDS AND TOXIC CHEMICALS

INJECTION HAZARD: EQUIPMENT CAN CAUSE SERIOUS INJURY IF THE SPRAY PENETRATES THE SKIN. DO NOT POINT THE GUN AT ANYONE OR ANY PART OF THE BODY. IN CASE OF PENETRATION SEEK MEDICAL AID IMMEDIATELY.

THIS SYSTEM IS CAPABLE OF PRODUCING 9000 KPA. TO AVOID RUPTURE AND INJURY, DO NOT OPERATE THIS PUMP WITH COMPONENTS RATED LESS THAN 9000 KPA WORKING PRESSURE (INCLUDING

BUT NOT LIMITED TO SPRAY GUNS, HOSE AND HOSE CONNECTIONS). Allen heath gld 80 manual.

BEFORE SERVICING, CLEANING OR REMOVAL ANY PARTS, SHUT OFF

POWER AND RELIEVE PRESSURE.

Extension Cords

Use a sufficient gauge: Up to 25 ft = 12/3 AWG; 25 to 50 ft =10/3 AWG.

Use only extension cords that are intended for outdoor use. These extension cords are identified by a marking “Acceptable for use with outdoor appliances; store indoors while not in use. Use only extension cords having an electrical rating not less than the rating of the product. Do not use damaged extension cords. Examine extension cord before using and replace if damaged. Do not abuse extension cord and do not yank on any cord to disconnect. Keep cord away from heat and sharp edges. Always disconnect the extension cord from the receptacle before disconnecting the product from the extension cord. If you are using an extension cord, it should always be completely unwound from the cable drum.

Grounding Instructions

This product must be grounded. If it should

malfunction or breakdown, grounding

3

provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER- Improper connection of the equipment-grounding conductor can result in a risk of electrocution. Check with a qualified electrician or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use any type of adapter with this product.

Caution

Follow the maintenance instructions specified in the manual.

This machine has been designed for use with cleaning detergent supplied or recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.

Water Supply (Cold Water Only)

Water hose must be at least 1/2 inch or 5/8 inch in diameter.

Flow rate of water supply must not fall below 2 GPM (gallons per minute).

Flow rate can be determined by running the water for one minute into an empty 5-gallon container.

The water supply temperature must not exceed 104°F/40°C.

Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.

NOTE: Dirt in the feed water will damage the unit. To avoid this risk, we recommend fitting a water filter.

Always prevent debris from being drawn into the unit by using a clean water source and an accessory water filter if required.

Save these instructions!

ASSEMBLY INSTRUCTIONS

4 Step 1

Step 2

Step 3

Step 4 and 5 Assemble high pressure hose to trigger gun

Step 1

Connect the high pressure hose to the high pressure outlet.

Step 2

Insert the spray wand. Press in against the spring tension and twist into the locked position.

Step 3

Connect the garden hose to the water inlet.

Step 5

Plug the power cord into the power outlet. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.

Step 4

Connect garden hose to the cold water source and turn water on completely.

Step 6 Turn on the pressure washer (I).

NOTE: This unit is equipped with a pressure switch. The motor only starts up when the trigger on the gun is pulled. The motor shuts off when the trigger is released.

USING THE ACCESSORIES

Quattro Nozzle

High pressure

High pressure

Rotating jet for

Low pressure

pencil jet

fan jet

maximum dirt

fan jet for

cleaning

cleaning

cutting action

detergent

injection

Selecting the jet

Release the trigger of the handgun.

Rotate the nozzle head until the symbol is aligned with the marking on the spray lance.

Note: The marking on the spray lance must be up during operation.

Karcher 395 M Manual

6

Wash brush

WARNING

This brush is ideal for removing stubborn

RISK OF INJECTION OR INJURY-DO

dirt and stains from finished surfaces. Use

NOT DIRECT DISCHARGE STREAM

with detergents only.

AT PERSONS.

TO AVOID SERIOUS INJURY, NEVER

POINT SPRAY NOZZLE AT YOURSELF,

OTHER PERSONS OR ANIMALS.

Detergents can only be applied at low pressure.

Step 1

Install the Wash brush or Quattro nozzle. Turn Quattro Nozzle to Low pressure position.

Rotate the spray lance in the direction of “ ” until reaching the stop.

Note: No detergent in high-pressure mode

Step 2

Fill detergent tank with 1.0 L Kärcher detergent.

Step 3

Turn on the pressure washer.

Pull trigger to operate unit: Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.

Pdf

For best results see Cleaning Tips on pages 9 & 10 for specific information on how to clean different surfaces.

Always Use Kärcher Detergents for Best Results.

Kärcher biodegradable detergents are specially formulated to protect the environment and your pressure washer. Special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life. For Kärcher Detergents, check your retailer or call:

1-800-465-4980

The following Kärcher detergents are

7

available:

Pressure Wash

Deck Wash

Degreaser

Touchless Vehicle Wash

Caution

Never use:

Bleach, Chlorine products and other corrosive chemicals

Liquids containing solvents

(i.e., paint thinners, gasoline, oils)

Tri-sodium phosphate products

Ammonia products

Acid-based products

These chemicals will harm the unit and will damage the surface being cleaned.

Step 1

Turn the switch to off (O) position and unplug cord from outlet.

8

Step 4

Disconnect the garden hose from the water inlet on the unit.

Step 2

Step 3

Turn off the water

Press trigger to release

source.

water pressure.

Step 5

Step 6

Disconnect the high pressure

Pull trigger down (A)

hose from the high pressure

and engage gun

outlet.

safety lock (B).

Step 1

Pull trigger down (A) and engage gun safety lock (B).

WINTERIZING AND LONG-TERM STORAGE

1.Disconnect all water connections.

2.Turn on the machine for a few seconds, until the water which had remained in the pump exits. Turn off immediately.

3.Do not allow high pressure hose to become kinked.

4.Store the machine and accessories in a room which does not reach freezing temperatures. DO NOT store near furnance or other sources of heat as it may dry out the pump seals.

Caution: Failure to follow the above directions will result in damage to the pump assembly and accessories.

5) Cleaning the

water inlet filter

Pull out the water in-

let filter with flat-nose

2006 lincoln navigator service manual download. Most Navigators are all-wheel drive, though a rear-wheel drive version was available.Lincoln has produced four generations of the Navigator, updating various technology to stay current.

pliers and rinse out in

warm water.

6) Cleaning the detergent inlet filter

Pull it out and rinse out in warm water.

Maintenance

The unit is mainte- nance-free.

Deck Cleaning

(with or without detergent)

Pre-rinse deck and surrounding area with fresh water. If using Kärcher Deck Wash, place detergent suction tube directly into cleaning solution and apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25 square feet. Allow Deck Wash to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure in a long sweeping motion keeping the spray nozzle approximately 3-6 inches from the cleaning surface. Always clean from top to bottom and from left to right. When moving on to a new section of the cleaning surface, be sure to overlap the previous section to eliminate stop marks and ensure a more even cleaning result.

House Siding

(with or without detergent)

Pre-rinse cleaning surface with fresh water. If using Kärcher Pressure Wash, place detergent suction tube directly into cleaning solution and apply to surface at low pressure (for best results, limit your work area to sections of approximately 6 feet and always apply detergent from bottom to top). Allow Pressure Wash to remain on surface 1-3 minutes. Do not allow detergent to dry on surface, if surface appears to be drying, simply wet down surface with fresh water. If needed, use special Wash Brush Attachment (not included) to remove stubborn dirt. Rinse at high pressure from top to bottom in an even sweeping motion keeping the spray nozzle approximately 6 inches from the cleaning surface.

Cement Patios, Brick and Stone

395

Karcher K 395 M User Manual Online

(with or without detergent)

Pre-rinse cleaning surface with fresh water. If using Kärcher Pressure Wash or Degreaser, place detergent suction tube directly into cleaning solution and apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25 square feet. Allow

Pressure Wash or Degreaser to remain on surface 1-3 minutes. Do not allow detergent

to dry on surface. Rinse at high pressure in 9 a sweeping motion keeping the spray

nozzle approximately 3-6 inches from the cleaning surface. Always clean from top to bottom and from left to right.

Cars, Boats & Motorcycles

(with or without detergent)

Pre-rinse vehicle with fresh water. If using Kärcher Touchless Vehicle Wash, place detergent suction tube directly into cleaning solution and apply to surface at low pressure. For best results, clean one side of vehicle at a time and always apply detergent from bottom to top, do not allow detergent to dry on surface. If needed, use special Wash Brush Attachment (not included) to remove stubborn dirt. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 6-8 inches from the cleaning surface (distance should increase when rinsing pin-striping or other sensitive surfaces). Always clean from top to bottom and from left to right. For best results, wipe surface dry with a chamois or soft dry cloth.

Caution: Do not use the rotary nozzle on vehicles as it may cause damage.

Barbecue Grills, Outdoor Power Equipment & Gardening Tools

(with or without detergent)

Pre-rinse cleaning surface with fresh water. If using Kärcher Pressure Wash or Degreaser, place detergent suction tube directly into cleaning solution and apply detergent at low pressure. Allow Pressure Wash to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure keeping the spray nozzle approximately 3-6 inches from the cleaning surface. For removing extremely stubborn dirt, it may be necessary to move the spray nozzle even closer to the surface for greater dirt cutting action.

Patio & Lawn Furniture

(with or without detergent)

Pre-rinse furniture and surrounding area with fresh water. If using Pressure Wash, place detergent suction tube directly into 10 cleaning solution and apply to surface at

low pressure. Allow Pressure Wash to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. If needed use special Wash Brush Attachment (not included) to remove stubborn dirt. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 3-6 inches from the cleaning surface. For best results, clean from top to bottom and from left to right.

Recommendations

Before cleaning any surface an inconspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results.

If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface.

When using on surfaces which might come in contact with food, flush surfaces with plenty of drinking water.

OPTIONAL CLEANING

Optional cleaning accessories are available to further enhance your cleaning capabilities: For details call 1-800-465-4980 or or visit www.karcher.ca

• Rotating Wash Brush

• Sandblasting Attachment

• Wash Brush

• Water Pumping Kit

• Underbody Wand

• Water Siphon Kit

• Pipe Drain Cleaner

• 25’ Extension Hose

Karcher K 395 M User Manual 1

KÄRCHER 2 YEAR WARRANTY

KÄRCHER CANADA INC. warrants to the original owner that this product shall be free from defects in material and workmanship for two years from the date of its original purchase. If such a defect appears during the warranty period, upon presentation of proof of purchase, KÄRCHER CANADA INC. will repair or replace (at its option) your product without charge.

This warranty does not cover accidental damage, unreasonable use, normal wear and tear, loss of use or other consequential damages, nor does it cover repairs made or attempted by unauthorized persons.

Trigger gun, hose, spray wands and other accessories are warranted for 3 months.

Please note that no returns will be accepted without prior authorization from our customer service department.

It is the owner’s responsibility to file claims for damage caused by public transportation carriers directly with the carrier concerned.

TROUBLESHOOTING

Disconnect the machine from the power source before making any repair.

Symptom

Cause

Solution

Motor will not start

On/Off switch is in the “OFF” (O)

Turn switch to the “ON” (I) position

position.

Power cord is not plugged in.

Ford 2016 F-350 SUPER DUTY Pdf User Manuals. View online or download Ford 2016 F-350 SUPER DUTY Owner's Manual. F-450 super duty for sale. This manual also for: 2016 f-350 super duty, 2016 f-450 super duty, 2016 f-550 super duty. Please, tick the box below to get your link: Get manual. Related Manuals for Ford 2016 F-250 SUPER DUTY. Automobile Ford 2016 FIESTA Owner's Manual 363 pages. View and Download Ford 2016 F-250 SUPER DUTY owner's manual online. 2016 F-250 SUPER DUTY Automobile pdf manual download. Also for: 2016 f-350 super duty, 2016 f-450 super duty, 2016 f-550 super duty.

Plug in power cord.

Extension cord is too long.

Replace extension cord with either

Extension cord is not proper gauge.

a 25 ft. 12/3 gauge cord or a 50

Extension cord is damaged.

ft. 10/3 gauge cord.

Electrical outlet does not supply

Try a different outlet.

TopNavi 10Text; TopNavi 15Text; TopNavi 11Text; v4.00.00. View and Download Konica Minolta Bizhub C554e quick manual online. All in One Printer. Bizhub C554e All in One Printer pdf manual download. Also for: Bizhub c454e, Bizhub c364e, Bizhub c284e, Bizhub. Konica minolta bizhub c554e user manual.

adequate power.

Unit does not reach high

Diameter of garden hose is too

Replace with a 1/2 inch or 5/8

pressure

small.

inch garden hose.

Water supply is restricted.

Check garden hose for kinks,

leaks and blockage.

Not enough inlet water supply.

Open water source full force.

11

Water inlet filter is clogged.

Remove filter and rinse out in

warm water.

Quattro nozzle is in low pressure

Turn quattro nozzle to high

position.

pressure position.

Output pressure varies

Not enough inlet water supply.

Turn water on full force. Check

high and low

garden hose for kinks, leaks or

blockage.

Pump is sucking air.

Check that hoses and fittings are

air tight. Turn off machine and

purge pump by squeezing trigger

gun until a steady flow of water

emerges through the nozzle.

Water inlet filter is clogged.

Remove filter and rinse out in

warm water.

Discharge nozzle is obstructed.

Blow out or remove debris with a

Samsung rugby 4 user manual pdf. fine needle.

Calcified gun, hose or spray wand.

Run distilled vinegar through

detergent tank.

TROUBLESHOOTING – continued

Symptom

Cause

Solution

No detergent.

Detergent is too thick.

Dilute detergent.

Quattro nozzle is in high pressure

Turn quattro nozzle tip to low

position.

pressure position.

Discharge nozzle is obstructed.

Blow out or remove debris with a

fine needle.

Quattro nozzle leaks.

Quattro nozzle not properly

Insert the quattro nozzle into the

attached.

trigger gun. Carefully press in

against the spring tension and

twist into the locked position.

Broken o-ring or plastic insert.

Call Customer Service.

Pump is noisy.

Pump is sucking air.

Check that hoses and fittings are

air tight. Turn off machine and

purge pump by squeezing trigger

gun until a steady flow of water

emerges through the nozzle.

12

Water leaks from pump

Loose fittings.

Check that all fittings are tight.

(up to 10 drops per

minute is permissible).

Water seals are damaged or worn.

Call Customer Service.

Oil Drips.

Oil seals are damaged or worn.

Call Customer Service.

If you encounter any additional difficulties not listed, please call our Customer Service at 1-800-465-4980for help, or visit www.karcher.ca

To continue the download you need to go through the captcha: